Everyday Health · 9° slope gel cushion
Not a flat cushion. A different angle to sit on.
SlopeFit™ 9° Slope Gel Cushion is a gel cushion that is higher at the back and lower at the front, giving an effective slope of about 9°. It was designed by spine specialist Dr. Gun Choi, with "how you end up sitting" considered before how soft it is. It is a general household cushion, not a medical device.
Status
It is at the sales preparation stage, with the product detail page for the Smart Store and the packaging box print files (final version of September 22, 2026) completed. It is to be sold on Naver Smart Store.
The store is being prepared. A purchase button will appear here when sales begin. Sales are planned for Korea.
Overview
The longer you sit, the more what matters is "how you end up sitting" rather than how soft the cushion is. So instead of asking people to keep correcting their posture, we changed the structure of the cushion itself.
Posture changes over time
When you sit for a long time, it is hard to keep the posture you started with. Over time the hips slide forward, and the sitting posture can change along with them.
Seating structure before softness
Rather than making it softer, we made the seating structure itself different. The back is raised and the front lowered to create an effective slope of about 9°.
Designed by a spine specialist
Designed by spine specialist Dr. Gun Choi. It began from 30 years of experience observing the spine and the way people sit.
A structure reached through making and revising
It was not 9° from the beginning. We revised the height, angle and shape again while making and using actual products, and arrived at the current SlopeFit structure through repeated prototyping and revision.
Structure illustrations from the product detail page.

FLEXIBLE CENTER CUT-OUT: designed so the gel structure can open around the center cut-out when weight is applied. 
SADDLE CURVE: the front is shaped as a saddle curve rather than a straight line. 
Size: about 42 × 36 cm, with a rear height of about 8 cm.
Screens

The cushion in use on an office chair. The side shows a 9° marking. 
The actual product photographed from the side at a low angle. The slope, higher at the back and lower at the front, and the round cut-out are visible. 
The actual product photographed from the side at a low angle. The slope, the round cut-out and the side mesh are visible. 
The actual product photographed from above at an angle. The overall shape and the round cut-out are visible.
Features
A slope of about 9°, a round center cut-out, a saddle-shaped front curve, a flexible Gel Grid and a Comfort Pad are combined into one seating structure.
01Four design elements
9° SLOPE
Higher at the back and lower at the front, with the flow of sitting in mind. Aiming to be neither too upright nor too reclined, we considered both ease in keeping the lower back naturally upright and a suitable degree of tension so that the body can hold its posture on its own.
FLEXIBLE CENTER CUT-OUT
Hip shape and body weight differ from person to person. Rather than fixing the cushion in one rigid shape, we designed it so that the gel structure can open naturally around the center cut-out when body weight is applied.
SADDLE CURVE
With the front area where the thighs and groin make contact in mind, the front is designed as a saddle-shaped curve rather than a simple straight edge.
FLEXIBLE GEL GRID
A gel grid structure that flexes with the load responds naturally to the body's movements and supports it comfortably.
02Three layers
COVER
A cover that is soft to the touch. It uses mesh chosen with breathability in mind.
COMFORT PAD
It makes the surface that touches the body soft and the seat feel comfortable. One Comfort Pad is included as standard to offset the pressure some users may feel when the gel is in direct contact with the body.
GEL BODY
The gel body, with a 3D lattice structure.
03Cover and shape
A cover you can remove and wash
The cover is removable and washable. For washing and care of the cover, please follow the instructions provided.
Non-slip base
The base has a non-slip surface.
Registered design
The product shape, including the round center cut-out, is a registered design. The package carries Design Registration No. 1202838.
How it works
Please check which side is the front and which is the back before use.
- 01
Check the chair
It can be used on typical office chairs, dining chairs and the like. For chairs with a very small or strongly curved seat, please check the product size of about 42 × 36 cm first.
- 02
Higher side toward the backrest
The higher side should go toward the backrest of the chair. HIGH = BACK, LOW = FRONT.
- 03
Sit on the rear seating area
With the higher side at the back, place your hips on the rear seating area of the cushion.
- 04
Find a comfortable position
At first you may notice a slope that feels different from a flat cushion. Adjust where you sit little by little to find the position that is comfortable for you.
- 05
Storage and care
Keep it away from sharp objects, fire and high temperatures. For washing and care of the cover, please follow the instructions provided.
Who it is for
Office workers
People who spend most of the day at a desk
Students
People who study at a desk for long hours
People whose posture slips easily
People whose posture slips easily on a flat cushion
People who care about cushion structure
People who value the structure of a cushion as well as its softness
Technology
This product is not a medical device. Seating feel may vary with body shape, weight and the chair used.
Product name
SlopeFit™ 9° Slope Gel Cushion. The model name is SlopeFit Cushion (슬로프핏 방석).
Size
Approx. 42 × 36 cm
Height and slope
Approx. 8.0 cm at the back, approx. 1.0 cm at the front, effective slope approx. 9°
Round center cut-out
Approx. 45 mm
Weight
Approx. 1.78 kg (measured for the complete product, including 1 additional pad and the dedicated cover)
In the box
Cushion cover, 1 Comfort Pad, gel pad
Cover
Removable cover, washable cover, mesh cover chosen with breathability in mind, non-slip base
Manufacture and sales
Manufacturer: SHENZHEN JINTONGYUAN TECHNOLOGY CO., LTD. (China). Commissioned and sold by: AllThatSpine Co., Ltd. Responsible for after-sales service: AllThatSpine Co., Ltd. Customer inquiries: the seller you purchased from, or the Smart Store.
FAQ
Isn't 9° too steep?
Unlike a typical flat cushion, SlopeFit is designed to be higher at the back and lower at the front, so when you first use it you may notice a slope that feels different from the cushion you are used to. The structure of about 9° is a design value applied after making and revising actual products, taking into account both ease in keeping the lower back naturally upright and a degree of tension at which the body can hold its posture on its own. How much you notice it may differ with body shape and the chair used.
Is it comfortable right away?
If you are used to a flat cushion, the slope may feel unfamiliar at first. That is because SlopeFit is not simply a softer cushion but a product whose seating structure itself is different. At first, adjust where you sit little by little to find the position that is comfortable for you.
Which way should it face?
The higher side should go toward the backrest of the chair. HIGH = BACK, LOW = FRONT. Place the higher side at the back, set your hips on the rear seating area of the cushion, then adjust little by little to the position that is comfortable for you.
Why is there a hole in the middle?
It is not a hole made simply to leave the middle empty. It is a structure that lets the flexible gel material open naturally to the left and right around the round center cut-out when body weight is applied. Taking into account hip shapes and loads that differ from person to person, it creates space for the gel structure to deform with some flexibility. The product shape including this round center cut-out is a characteristic structure of the product and is a registered design.
How is it different from other gel cushions?
The main difference in SlopeFit is the shape and angle of the product rather than the gel material itself. Unlike a typical flat cushion, it combines into one seating structure a slope of about 9° that is higher at the back and lower at the front, a round center cut-out that opens flexibly, a saddle-shaped front curve that takes into account where the thighs make contact, a flexible Gel Grid and a Comfort Pad. In other words, it is not simply a softer gel cushion but a product designed differently from its shape up, with how you end up sitting in mind.
Why is an additional pad included?
Gel has the advantage of moving flexibly, but when the body rests directly on gel for a long time, some people may feel pressure in certain areas. To offset this, one Comfort Pad is included as standard. The pad is not there to raise the height of the product. Its role is to make the seating feel between the gel body and your body softer still.
What are the size and weight?
The product measures about 42 × 36 cm. The maximum height at the back is about 8.0 cm and the height at the front is about 1.0 cm, and the measured weight of the complete product, including 1 additional pad and the dedicated cover, is about 1.78 kg.
Can it be used on any chair?
It can be used on typical office chairs, dining chairs and the like, but seating feel may differ with the size and shape of the chair. In particular, for chairs with a very small or strongly curved seat, please check the product size of about 42 × 36 cm first.
Does it help with back pain or disc problems?
SlopeFit is not a medical device and is not a product intended to treat any condition or relieve pain. It is a general household cushion, designed around the structure of sitting for long hours, with ideas drawn from the sitting postures and daily habits of people observed over many years of spine care.
Specs
Specifications
- Product name
- SlopeFit™ 9° Slope Gel Cushion
- Size
- Approx. 42 × 36 cm
- Height
- Approx. 8.0 cm at the back, 1.0 cm at the front
- Slope
- Approx. 9°
- Weight
- Approx. 1.78 kg (with pad and cover)
- In the box
- Cushion cover, 1 Comfort Pad, gel pad
- Cover
- Removable, washable, non-slip base
Notice
This product is not a medical device and is not intended to treat any condition or relieve pain. Seating feel may vary with body shape, weight and the chair used.



